Foundry Equipment Engineers

SR 998 fevicol adhesive is a synthetic rubber based solvent containing contact adhesives specially designed for the industrial segment. It exhibits excellent bonding strength. It dries to a tough, flexible film with good resistance to water and aging. It can be applied by brush or roller coater.

Product Features

• Free from benzene (non-hazardous to health)
• Excellent strength
• Preferred by the users dealing only in quality works

Application of Product

• Used to bond variety of substrates in painted metal, mild steel, glass, galvanized steel, chip board, PU sheet, leather, leather board, cementitious flooring, GRP, rigid PVC board, and synthetic fabrics etc., encountered in the automotive, railway, vehicle building, construction, and electrical areas of ship-building and in many other industries

Specification:-

• Viscosity: 20 to 25 P
• Specific gravity: 0.85 to 0.90
• Flash point: 0 to 4° C
• Drying time: Approximately 5 to 10 minutes

These are anaerobic speciality formulations for pipe joints/fittings (pneumatic and hydraulic) applications. These are designed tobe used for pipe joints, pneumatic fittings and can be used in place of teflon tape.Salient Features & Benefits: : Seals hydraulic and pneumatic threaded fittings: : Immune to fuels, oil, solvents and most chemicals: : Eliminates use of teflon tape: : Used for high pressure threaded joints: : Ensures an extremely durable chemical resistant seal

Epoxy adhesives are a two component or single component adhesives comprising of resin and hardener mixture. On mixing theresin and hardener, Fevitite solidifies by polymerisation. Its excellent low creep properties and strong joints make it suitable forstructural bonding applications. It has the ability to bonds all engineering materials barring few plastics, for which a suitable primercan be applied before bonding.

These are single component elastomeric silicone sealants which cure by absorbing moisture in the air. They provide good adhesionto most of engineering materials such as metals, plastics, ceramics, glass, fibre glass, and excellent resistance to temperature,weather, vibration, chemicals, etc.

Water based adhesives are user friendly and non toxic in nature. These are non flammable and non hazardous in nature. Beingviscous and thixotropic in nature, these can be applied by either spraying or brushing.